What Can I Use As A Contact Cleaner?

What can be used as electrical contact cleaner?

2 Answers.

The 100% alcohol would be considered as the ideal material to clean any electronic contacts as they evaporate quickly and leave no residue behind..

Can I use WD 40 instead of contact cleaner?

WD-40 (or 3-in-1 oil) work extremely well as contact cleaner. The problem is, if used in environments where there could be dust, the oil residue causes dist to stick and creates more problems that you started with.

How do you make contact cleaner?

A simple 1:1 mixture of isopropyl alcohol and distilled water! It should be noted I actually do use the vinegar and water solution when cleaning the surfaces of plastic cased electronics, because alcohol over time can cause yellowing on certain white or lighter plastic surfaces.

Can you use wd40 to clean electrical connections?

Simple petroleum jelly is often used instead of terminal grease, and a simple oil can be used instead of contact spray. … By the way: There is a contact spray form WD40, too, but it is more a cleaner to remove grease, oil, flux and other residues from PCBs etc.

What should you not use WD 40 on?

Accepted Answer: Firearms, Drive Chains & Gears Drive chains of any type – Because WD-40 isn’t a lubricant, it really will not work well on drive chains of any type. Gears of any type – WD-40 doesn’t have enough lubrication affect to be useful on any type of gearing.

What can I use instead of DeoxIt?

There are plenty of commercial alternatives on the market, and some folks even claim that a 5% solution of oleic acid in naptha is a suitable DIY substitute for DeoxIt. There are a number of head-to-head comparison videos out there that pit DeoxIt against cheaper rivals, like WD-40.

Can contact cleaner damage electronics?

When you spray a contact cleaner, it can quickly clean up the dirt in electronic devices and dry immediately. And the main requirement of this cleaning fluid is not the conductor / does not conduct electricity. So it is safe to spray onto all parts of electronic devices.

Is isopropyl alcohol a contact cleaner?

An example of a simple contact cleaner is isopropyl alcohol. Some contact cleaners are designed to evaporate completely and rapidly, leaving no residue.

What is the best electrical contact cleaner?

Best Sellers in Electrical Cleaners#1. … Hosa D100S-2 CAIG DeoxIT 100% Spray Contact Cleaner, 2 oz. … WD-40 Specialist Electrical Contact Cleaner Spray – Electronic & Electrical Equipment Cleaner. … CRC 05023 Battery Cleaner with Acid Indicator – 11 Wt Oz.More items…

Is brake cleaner the same as contact cleaner?

Generally you can use no-residue contact cleaner in place of brake parts cleaner, but it’s usually not as effective at cleaning and costs a lot more. … Non-chlorinated brake cleaner might be somewhat close to contact cleaner, though it’s likely a more powerful solvent and more likely to damage plastics.

Can I use contact cleaner on my phone?

If too much is applied and seeps into your phone it can actually damage it. Instead, read through phonesyfreakies comments. Contact cleaner is designed to clean metal contacts and electronic components, and it evaporates without leaving behind any residue.

Is isopropyl alcohol good for cleaning electronics?

Isopropyl Alcohol 99% is ideal for industrial and consumer cleaning of electronics, because its fast evaporation ensures that it will dry spot free. IPA 99% is also completely miscible in water, which is efficient when cleaning consumer products that may require a water and IPA 99% mixture, such as laptop computers.