Quick Answer: Where Is The Reset Button On Arris Modem?

How do I reset my Arris modem?

Most Arris routers can be reset using the Reset Button.Locate the Reset Button on your Arris modem or router (typically found on the back of the device).

When you locate the button, press and hold it for at least 15 seconds.

Wait for the reset to complete—this process can take a few minutes..

How do I troubleshoot my Arris modem?

Check that the USB or Ethernet cable is attached at the modem and the computer. Try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. Try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes.

Where is the reset button on the modem?

No matter what kind of modem you have, the RESET button is likely on the back, and is usually red. It’s recessed to prevent it from being pushed by accident, so you’ll need a bent paperclip or pen tip to press it.

Why does my Arris modem keep blinking?

Step 1: Arris Modem Firmware Upgrade Occasionally, your Arris modem will undergo a scheduled firmware upgrade. Hence, it causes the blinking DS light on your Arris modem. During the upgrade, you will not be able to access the internet. Usually, the firmware upgrade lasts for 10 minutes.

How do I check my modem status?

To view the status of your cable modem or modem router initialization:Launch a web browser from a computer or mobile device that is connected to your network.Enter your cable modem or modem router’s user name and password. The user name is admin. … Select Cable Connection. The cable connection information displays.

Why is my internet not working?

There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

What happens if I reset my Arris router?

Resetting a device erases all configurations that have been made and puts it back to factory defaults. Warning: Resetting can cause problems if you don’t know what to expect. Please consider the following before continuing. The router’s main username and password are reset.

How do I know if my Arris modem is working?

Arris Cable Modem – Front PanelPower – LED will be solid green when the power supply is properly connected to the modem and the wall outlet.Online – LED will be steady when online, LED will flash when in standby mode.Cable – LED will flash when data transfer occurs.USB – LED will flash when data transfer occurs via USB.More items…

How do I check my Arris modem settings?

Open up a web browser (Internet Explorer, for example) and enter the IP address http://192.168.0.1 in your browser’s address bar and press Enter. The Login window will prompt for the router configuration username and password.

Why is my Arris modem so slow?

If you are struggling with slow internet speed on your Arris Modem, you need to consider the environmental factors because they pose an impact on the wireless transmission. … If you have the modem installed in a corner, try relocating it, or establish the ethernet cable network for better results.

How do I know if my Arris modem is bad?

However, if your modem is bad or is on the way to going bad, here is what you can expect:The modem won’t turn on.You can’t connect to the internet at all.Internet connection drops in and out randomly.Internet speed is inconsistent or is consistently slower than it used to be.More items…

How do I reboot my modem?

How to Reboot Your ModemUnplug the power cord from the gateway or modem and remove any batteries.Wait at least one minute, then reinsert any batteries and reconnect the power cable.Wait at least two minutes to allow the modem to power up. … Check your internet connection to make sure it’s working.