Question: Does 1600mHz Ram Work On 1333mHz?

Can I use 1333MHz and 1600MHz RAM together?

The compatibility of the ram depends more on your motherboard than your cpu.

If your motherboard supports the 1600mHz, then it is likely that the g3258 will also.

However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz..

Does dh61ww support 1600mhz RAM?

Splendid. Intel® Desktop Board DH61WW no, your mobo is limited to 1333mhz, no overclocking possible. but you will be able to run all 16gb. for optimal performance try tightening timings a bit!

How do I change RAM speed in BIOS?

Once into the BIOS, find your way to the ‘Overclock’ settings and once there, look for memory settings. After doing this, go back to the previous menu and look for DRAM Voltage. This will most likely display ‘Auto’, in which case, you need to change this to your specific value.

Is 1600MHz RAM fast?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Can I put 1600MHz ram in a 1066mhz slot?

So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz.

Does faster RAM work slower motherboard?

Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.

Can I combine different speed RAM?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. … You cannot mix DDR, DDR2, DDR3 in a system as each technology requires a different type of socket.

Why does my 1600MHz RAM shows 1333MHz?

1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it. It will not harm anything.

Can you use 1333mhz ram in 1066MHz?

Yes, it is possible, but the speed of both chips are going to be as 1066 MHz. Yes it can, but if its incompatible, underclock you 1333Mhz RAM to 1066MHz.

Can I use 1333mhz and 1866MHz RAM together?

Yes many people will recommend getting matching sticks of RAM, but I almost never run into issues and I mix and match RAM all the time. For example, If you put just one 1866MHz RAM into your motherboard, it will still run at 1333MHz by default until you go into the BIOS and overclock it to 1866MHz.

What is the difference between 1333MHz and 1600MHz RAM?

1333MHz and 1600MHz is the rated speed of the RAM, the 8-8-8-24/9-9-9-27 indicates the timings of the modules. The tighter the timings (lower) the faster the RAM – 8-8-8 is (marginally) quicker than 9-9-9.

Which is faster 1333mhz or 1600mhz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Is 1333MHz RAM good for gaming?

Yes it definitely is. Recent benchmarks show that there is little difference, like 5% between 1333Mhz or super high-end 2133Mhz modules. So it’s kind of a waste to overspend on expensive RAM. Your extra dollars will be better spent on a SSD, or a better GPU or CPU.

Does dh61ww support SSD?

Yes , but the SATA ports are older models that run at 3.0 Gbit/s instead of the current 6 Gbit/s standard . That means buy an older SSD and get more capacity because there is no point paying for the latest highest speed models .